Benchmark EIE – FMS Legacy Config Send Data Group

Devices > Remote Devices > Benchmark EIE > FMS Legacy Config Send Data Group

FMS Legacy Config Send Data Group

The "FMS Legacy Config Send Data" (GmrCfgSend) data group is used to send modified measurement data to the field device.

The "FMS Legacy Config Send" data group depends on one or more support data groups for its data. Support data groups are found in the supportDg section of your sample template. Mapping between "FMS Legacy Config Send" data group elements and FMS Legacy data items is within the configItems section of gmrMaps in the device template file. Optional data groups can be used to get similar data for different meter types.

Example

The configuration for an orifice meter is found in the MeterOrif data group and the configuration for a turbine meter is found in the MeterTurb data group. For any given meter run, only one of these data groups is configured. For a turbine meter run, the MeterTurb data group is configured, but the MeterOrif data group is not, so only data from the MeterTurb data group is sent to the EFM service.

FMS Legacy Config Send Data Group (DataGroup) Attributes

The following table describes "FMS Legacy Config Send" data group attributes. All attributes in CygNet templates are case sensitive; but the case sensitivity of attribute values is based on context.

For information about available generic attributes, see DataGroup.

Attribute	Description	Value	Required
dgProtocol	Native and Internal data group types, as defined by the dgProtocol attribute, are not user-editable aside from mapping UDCs. To add a custom data group using the native protocol, set dgProtocol to "NativeRipn" and add RIPN elements as defined in Benchmark documentation.	Internal, NativeRipn	Yes

Attribute

Description

Value

Required

dgProtocol

Native and Internal data group types, as defined by the dgProtocol attribute, are not user-editable aside from mapping UDCs.

To add a custom data group using the native protocol, set dgProtocol to "NativeRipn" and add RIPN elements as defined in Benchmark documentation.

Internal, NativeRipn

Yes

Support Data Groups (supportDg)

The following table describes "FMS Legacy Config Send" support data groups.

Support Data Group	Description	Required
TBD	Your "FMS Legacy Config Send" data group requires at least one support data group. Support data groups are user configurable for this EIE. Exactly what support data group(s) you choose depends on your unique setup and needs. Although you can choose which data groups will serve as support data groups for "FMS Legacy Config Send," the data group protocol (dgProtocol) must be "Point", "PointTbl", or "Modbus".	Yes

Support Data Group

Description

Required

TBD

Your "FMS Legacy Config Send" data group requires at least one support data group.

Support data groups are user configurable for this EIE. Exactly what support data group(s) you choose depends on your unique setup and needs.

Although you can choose which data groups will serve as support data groups for "FMS Legacy Config Send," the data group protocol (dgProtocol) must be "Point", "PointTbl", or "Modbus".

Yes

Support Data Group (supportDg) Attributes

The following table describes "FMS Legacy Config Send" support data group (supportDg) attributes. All attributes in CygNet templates are case sensitive; but the case sensitivity of attribute values is based on context.

Attribute	Description	Value	Required
N/A	At this time, there are no attributes unique to the supportDg section.	N/A	N/A